Location

Cleaning before painting and coating

acp cleaning for painting plastic parts

with

DRY CLEANING

to perfect

PAINTING !

acp advanced clean production GmbH

Cleaning with

CO2-snow jet

More info

Dry and Residue Free Cleaning

Non-Abrasive

Better for the Environment!

acp advanced clean production GmbH cleaning for painting
acp cleaning for painting plastic parts

Dry and Residue Free Cleaning

Non-Abrasive

Carbon-neutral process! *

CO2 is recovered from carbon-capture

icon-manufacturing_cost_savings

Cost benefits of CO2 snow cleaning of plastics before painting...

compared to power-wash systems.

check_box_black  > 40% savings in investment costs
check_box_black  > 50% savings in running costs
check_box_black  > 80% savings in throughput
check_box_black  > 80% savings in energy (NO DRYING PROCESS)
check_box_black  > 80% less space (foot-print)

 

Environmental benefits of CO2 snow cleaning...

compared to power-wash systems.

check_box_black  Not toxic (lower H&S costs, no high rated safety precautions)
check_box_black  No toxic waste disposal (xx% savings in running costs & no chlorine's)
check_box_black  No secondary waste to remove
check_box_black  > 80% savings in energy (NO DRYING PROCESS)
check_box_black  > 80% less space (foot-print)
check_box_black  CO2 is recovered from Fertilizers, Petrochemistry, and Fermentation industries
check_box_black  CO2 is a gas present in the air (0.05%) that we breath and that plants need photosynthesise

 

automation CO2 cleaning

Automation ready...

with minimal maintenance

check_box_black  Requires almost the same equipment as spray-painting (robots, booths, air-flow)
check_box_black  Can use nearly the same robot trajectories as for painting or flaming (min effort required)
check_box_black  Modular nozzle design allowing selective switching of arrays to suit geometry of components
check_box_black  No drainage holes required in components (dry and residue free)
check_box_black  Nearly zero maintenance (xx% savings in running costs)

3D cleaning for exterior components

Cleaning by painting robot

The acp CO2 snow-jet cleaning before painting process is designed for cleaning of plastic car body parts. The device has an impressively compact cleaning head and is extremely flexible and adaptable, enabling it to be fitted to typical modern painting robot systems. Nozzles can be switched on and off individually to match the geometry of the component.

Modular array technology enables the cleaning tool to be optimally adapted to the task at hand.

The nozzles can be switched on and off individually during processes in order to optimally adapt the cleaning step to the geometry of the component concerned.

CO2 Flatbed cleaning

2D cleaning for interior components

Flatbed cleaning

The process is ideally suited for cleaning plastic interior parts in flatbed or coating systems. Together with its ability to be adapted to the wide range of flatbed systems on the market, the highly-flexible cleaning device offers the customer outstanding efficiency.

interior cleaning

Cleaning interior components

Optimum jet force enables the cleaning head to achieve targeted high traversing speeds.

flakes

Removing flakes from interior components

Removes flakes and filaments from structured surfaces and design components and also from the delicate edges of plastic parts, e.g. after injection-moulding.

specific CO2 cleaning

Specific cleaning

2D/3D off-line cleaning processes

The flexible system can be adapted to just about any handling device. This allows you to clean, deburr and process components, contours or individually defined areas directly during production, for example after injection moulding.

jet module

Jet module

acp CO2 cleaning system

The acp system is fully modular and offers an exceptional range of flexibility and cleaning possibilities. This allows the process to be integrated into any type of system, thus enabling the customer/operator to use a standardized process that meets all requirements.

micro deburring

Fine/Micro deburring

Removes tiny burrs from delicate edges on plastic components caused by slight overfeeding.

acp - advanced clean production GmbH